Lasercutter: Epilog Zing

The Epilog Zing 6030 is a 40 Watt CO2 Laser with a build area of 60*30 cm. check out HERE what you could cut or engrave with it. 

Tech Specification

Engraving Area 610 x 305 mm (24″ x 12″)
Maximum Material Thickness  197 mm (7.75″)
Laser Wattage 40 watts
Laser Source State-of-the-art, digitally controlled, air-cooled CO2 laser tubes are fully modular, permanently aligned and field replaceable.
Intelligent Memory Capacity Multiple file storage up to 64 MB. Rolling buffer allows files of any size to be engraved.
Air Assist Attached air compressor to remove heat and combustible gases from the cutting surface by directing a constant stream of compressed air across the cutting surface.
Laser Dashboard The Laser Dashboard™ controls your Epilog Laser’s settings from a wide range of software packages – from design programs to spreadsheet applications to CAD drawing packages.
Red Dot Pointer Since the laser beam is invisible, the Red Dot Pointer on Epilog’s Zing Laser allows you to have a visual reference for locating where the laser will fire.
Relocatable Home When engraving items that are not easily placed at the top corner of the laser, you can set a new home position by hand with the convenient Movable Home Position feature on the Zing Laser.
Operating Modes Optimized raster, vector or combined modes.
Motion Control System High-speed micro stepper motors.
X-Axis Bearings Shielded Roller Bearing Assembly on a Ceramic Coated Aluminum Guide Rail.
Belts Advanced B-style Kevlar Belts.
Resolution User controlled from 100 to 1000 dpi.
Speed and Power Control Computer or manually control speed and power in 1% increments to 100%. Vector color mapping links speed, power and focus to any RGB color.
Print Interface 10 Base-T Ethernet or USB Connection. Compatible with Windows® XP/Vista/7/8.
Size (W x D x H) 965 x 692 x 381 mm (38″ x 27.25″ x 15″)
Weight 64 kg (140 lbs)
Electrical Requirements Auto-switching power supply accommodates 110 to 240 volts, 50 or 60 Hz, single phase, 15 amp AC.
Maximum Table Weight The Zing 16 and 24 have a static table weight of 22.7 kg (50 lbs) and a lifting table weight of 11.5 kg (25 lbs).
Ventilation System 350 – 400 CFM (595-680 m3/hr) external exhaust to the outside or internal filtration system is required. There is one output port, 4″ in diameter.